Maintenance methods for stage electric hoist

　　For stage electric hoists to be durable, daily maintenance is essential. So how to maintain the hoist?

　　After using the stage electric hoist, wipe off any debris and grease on the surface first. If there are rust spots, use sharp tools to remove them to prevent them from corroding the hoist on a large scale;

　　Disassemble the gourd by professionals, clean the friction plates and internal gaps of the gourd of dust, debris, etc., apply lubricating grease and anti rust grease;

　　Finally, install the gourd and conduct no-load and load tests to confirm everything is normal before selecting a dry and ventilated place for storage.

　　The above are the maintenance methods for stage electric hoists. Regular cleaning and maintenance of the hoist can make it durable, efficient, and safe to operate.

　　How often is it appropriate to maintain the stage chain electric hoist?

　　After using the stage chain electric hoist for a long time, various problems are inevitable. However, if we pay attention to the maintenance of the stage chain electric hoist, its service life can be extended a bit. So how often is it appropriate to maintain the stage chain electric hoist?

　　Firstly, for the newly purchased stage chain electric hoist. The newly purchased stage electric hoist is like a newborn child with a healthy body. It can run smoothly without maintenance, but excessive maintenance can have the opposite effect, wasting both cost and time.

　　Secondly, after using the stage chain electric hoist for a period of time, various parts have shown varying degrees of minor wear and tear, requiring regular maintenance. But how often the earth is maintained depends on the actual construction situation of each customer.

　　If you need to use the stage chain electric hoist every day, I suggest maintaining it at least once every 3 days. Because the lubricating oil attached to the body of the gourd that is used every day fails quickly, if lubricating oil is not applied for a long time without maintenance, the wear and tear of the gourd will increase, accelerating the scrap speed of various parts. If the frequency of use is low, then the wear and tear of the gourd is also small. It is recommended to maintain it once a week.

　　In short, it depends on the length of the protective effect of the lubricating oil, which means it is best to replace it before the lubricating oil effect disappears. In fact, the protective effect of lubricating oil is not only related to time, but also to the environment it is in. Lubricating oil fails quickly in dusty and humid environments.

　　So, it is still necessary to analyze the specific situation on a case by case basis. Users can regularly observe the condition of the lubricating oil. If they notice changes in viscosity, color, odor, or if there is a lot of dust adhering to the surface of the lubricating oil, it is time to maintain the stage chain electric hoist.