Cleaning guide for stage electric hoist

　　1、 Preparation before cleaning

　　(1) Turn off the power: Before cleaning the stage electric hoist, be sure to turn off the power first to ensure safe operation.

　　(2) Prepare cleaning tools: Prepare clean soft cloths, brushes, cleaning agents, and other cleaning tools. Soft fabrics can be chosen from cotton or non-woven fabrics, avoiding the use of rough fabrics to prevent scratching the surface of the equipment. Cleaning agents can be selected from specialized electrical equipment cleaning agents or mild neutral cleaning agents.

　　2、 Cleaning steps

　　(1) Shell cleaning

　　Gently wipe the outer shell of the stage electric hoist with a soft cloth to remove dust and dirt from the surface. For stubborn stains, you can spray an appropriate amount of cleaning agent on a soft cloth and then wipe it off.

　　Be careful not to let cleaning agents flow into the interior of the equipment to avoid damaging electrical components.

　　For the gaps and corners on the shell, a small brush can be used to clean to ensure that there is no dust residue.

　　(2) Chain cleaning

　　The chain of the stage electric hoist is an important transmission component that needs to be cleaned regularly. Firstly, use a brush to remove dust and debris from the chain.

　　Then, you can spray an appropriate amount of cleaning agent onto the chain and wipe it clean with a soft cloth. Be careful not to let the cleaning agent come into contact with the joints of the chain, so as not to affect the flexibility of the chain.

　　After cleaning the chain, you can apply an appropriate amount of lubricating oil on the chain to maintain its lubrication and smooth operation.

　　(3) Hook cleaning

　　The hook is an important load-bearing component of the stage electric hoist and also needs to be cleaned. Wipe the surface of the hook with a soft cloth to remove dust and dirt.

　　Check whether the opening of the hook is deformed or worn, and replace the hook in a timely manner if there is a problem.

　　For the connection part of the hook, a small brush can be used for cleaning to ensure a firm and reliable connection.

　　(4) Electrical cleaning

　　The electrical part of the stage electric hoist generally does not require deep cleaning, but the surface can be gently wiped with a clean soft cloth to remove dust.

　　Be careful not to let water or cleaning agents come into contact with electrical parts to avoid short circuits or damage to electrical components.

　　If there are obvious stains or dust accumulation in the electrical part, compressed air can be used for blowing, but be careful not to apply too much pressure to avoid damaging electrical components.

　　3、 Precautions after cleaning

　　(1) Drying treatment: After cleaning the stage electric hoist, it should be placed in a well ventilated place for drying treatment to ensure that there is no residual moisture on the surface and inside of the equipment.

　　(2) Equipment inspection: Before using the stage electric hoist, a comprehensive inspection should be conducted to ensure that all parts of the equipment are operating normally and without any abnormal conditions.

　　(3) Regular cleaning: In order to maintain the good performance of the stage electric hoist, it is recommended to clean it regularly, and the specific cleaning frequency can be determined according to the usage environment and frequency.