How to prevent the shaking of electric hoists on stage

　　Most stage electric hoists are operated by humans on the ground using buttons, and can also be operated from the driver's cabin or remotely controlled wirelessly.

　　If there is shaking during use, it can pose a danger to the operation, especially during the lifting of the performance mold, which not only affects the performance but also threatens the personal safety of the actors.

　　There are many methods to control the shaking of the stage electric hoist. First, start with prevention. Before use, carefully check the condition of the stage electric hoist and do not use problematic ones.

　　In use, it is absolutely prohibited to use it in an environment where it is not allowed to exceed the rated load and the rated closing frequency per hour by more than 120 times.

　　Another operational issue is that it must not be pulled or lifted at an angle. When moving horizontally, it should be slowly started. Do not lift the load sharply, otherwise even if the above operations are followed, the lifted weight will still shake to some extent.

　　The reason for choosing an electric hoist on stage performance is because its advantages perfectly match such a work environment.

　　Its compact and beautiful design, low noise, and no impact on the performance of the program make it the preferred choice for stage lifting. Lubricating grease is installed in a gearbox to prevent oil droplets from penetrating the stage. More importantly, it has made remarkable contributions to the construction of the stage, making it the preferred choice for stage lifting.

　　Special technical requirements for stage electric hoists

　　When lifting the stage lighting frame, sometimes dozens of stage electric hoists need to be used together. Without reliable quality, it will cause a lot of trouble.

　　The manufacturer is fully aware of this, and the stage electric hoist has added a ring chain anti blocking guide rail, equipped with an 80 level chain with eight times the safety factor, and a brake type sealed motor. When leaving the factory, the motor will undergo a 1.5 times load test lift, which has a large margin of probability. Generally, when multiple electric hoists are used simultaneously, synchronous lifting can be ensured. However, if the load difference is too large and causes errors, it can be corrected and then solved by overall lifting.

　　For the convenience of customers, some manufacturers have specially designed aviation carrying cases that can prevent chain entanglement, making installation and use more convenient.

　　After special design, the stability of the stage electric hoist is quite high, making it very suitable for lifting stage molds during performances. The low noise feature does not affect the performance effect, making it both convenient and practical