X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
Safety technical measures for the installation of electric hoists
Category : W12 Stage Inteligent hoist
Get a QuoteProduct Details
Safety technical measures for the installation of electric hoists
1. Provide safety technical briefing to construction personnel, familiarize themselves with the construction plan, and install according to the requirements of the construction plan.
2. During the construction process, the construction personnel shall have specific division of labor, clarify their responsibilities, divide the construction and warning areas during lifting, and set up prohibited area signs. Non construction personnel are strictly prohibited from entering the site. All construction personnel must wear safety helmets when entering the site, be familiar with command signals, obey the instructions of a dedicated person throughout the lifting process, and shall not leave their work positions without authorization.
3. Throughout the construction process, always carry out on-site cleaning work and clear all obstacles to facilitate operations. All personnel participating in high-altitude operations should wear a safety belt during operation and hang it in a safe and reliable place. High altitude operations should carry a tool kit, and it is strictly prohibited to throw tools and debris onto the ground from high altitude to avoid injury or other accidents.
4. Before lifting the equipment, it is necessary to strictly check the selection and bundling of the steel wire rope used for lifting. During the lifting process of the equipment, the lifting and lowering should be stable, without any impact or vibration, and no one is allowed to lift the equipment with the equipment. If the lifting process is interrupted due to reasons, effective measures must be taken to deal with it, and the equipment must not stay in the air for a long time. The on-site person in charge is responsible for the safety of the entire lifting process.
5. During working hours, it is strictly prohibited to play around and operate under the influence of alcohol.
6. Any use of buildings as anchor or suspension points must be approved by the wild species before use.
7. The temporary scaffolding must be firmly and reliably erected, and can only be put into use after inspection and meeting the requirements.
RELATED PRODUCTS .
Stage electric hoist is a common lifting and hoisting machinery on stage, which is easy to operate and not prone to malfunctions. However, even so, there may be errors in operation that can cause prob
The stage electric hoist will make the stage more dazzling. You can hang the sound and lighting equipment on the stage. In order not to affect the stage lighting, the whole body is painted black. So,
The stage electric hoist independently developed by Tianjin Kemei has completely overturned the poor quality and low efficiency of domestically produced electric hoists through practical actions. Our
Auto shows are mainly held by businesses to showcase automotive products and related technologies, promote communication between car manufacturers and consumers, and drive the development of the autom
2024-08-23
admin
0
China Guangzhou Lighting and Sound Exhibition
Tianjin Kemei Machinery Manufacturing Co., Ltd. participated in the lighting and audio exhibition in Guangzhou, China on May 23, 2024
2023-12-19
admin
0
Why should the stage hand hoist work environment b...
The stage hoist often operates in outdoor environments and inevitably comes into contact with a large amount of dust.
2023-12-18
admin
0
Do not use stage gourds in violation of regulation...
Stage gourds are divided into two types: stage electric gourds and stage chain gourds, mainly used for stage construction, prop lifting
2023-12-18
admin
0
The "Invisible Cloak" of Stage Electric Hull
The stage electric hoist is a commonly used lifting tool when building a stage. It has a compact appearance and is easy to use