X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
1. The hook should be produced and manufactured by a formal professional factory according to the technical conditions and safety regulations of the hook. The product should have a quality certificate
Category : W12 Stage Electric Hoist
Get a Quote
Product Details
Safety precautions for using electric hoist hooks on stage
1. The hook should be produced and manufactured by a formal professional factory according to the technical conditions and safety regulations of the hook. The product should have a quality certificate from the manufacturer, otherwise it is not allowed to be used.
2. The new hook should undergo a load test, and the measured hook opening should not exceed 0.25% of the original opening.
3. During use, the hook should be regularly checked for cracks, severe deformation, corrosion, and wear
4. The hook should be tested once a year. During the experiment, a static test should be conducted for 10 minutes under a load of 1.25 times the allowable working load. The test should be checked with a magnifying glass or other methods, and there should be no cracks, cracks, or residual deformation.
5. Three dangerous sections should be cleaned with kerosene and examined for cracks using a magnifying glass. The wear of the lining and pin should be checked for the plate hook.
6. Defects on the hook shall not be repaired by welding.
Safety inspection of stage electric hoist hooks
1. The hook used for manually driven lifting mechanism shall be tested with 1.5 times the rated load as the inspection load.
2. The hook used for the power driven lifting mechanism shall be tested with twice the rated load as the inspection load.
3. After removing the inspection load from the hook, there should be no obvious defects or deformations, and the increase in opening should not exceed 0.25% of the original size.
4. Qualified inspection hooks should be marked in the low stress area of the hook, including the rated lifting capacity, factory logo or name, inspection mark, production number, and other content.
RELATED PRODUCTS .
To ensure the safe use of Lifting Polyester Sling and extend their service life, users need to prevent and control the risks of temperature limitations and mechanical damage.
The design of the stage electric hoist control box usually takes into account the operating habits and convenience of stage staff. The operation interface is simple and clear, with a reasonable button
The voltage of electric stage hoists is usually between 220V and 440V. Commonly seen voltages are 220V and 380V. Electric stage hoists of different models and from different manufacturers will select
During the preparation and progress of the wedding, if there is a need to adjust the position or height of the items on the stage, the electric hoist can complete the task quickly and conveniently. Th
2025-02-28
创始人
0
The participation of Tianjin Kemei in the Guangzho...
Tianjin Kemei made a remarkable and eye-catching appearance at the Guangzhou (International) Performing Arts Equipment, Intelligent Acoustic, Optical and Electrical Products...
2025-02-27
创始人
0
Guangzhou (International) Performing Arts Equipmen...
In the era of the rapid development of stage lifting equipment and intelligent acousto - optic technology, every industry event serves as a crucial opportunity for innovatio...
2025-02-27
创始人
0
GET show Guangzhou (International) Performing Arts...
Tianjin Kemei Machinery Manufacturing Co., Ltd. has been deeply engaged in the stage equipment manufacturing field for many years and has developed into a modern benchmark e...
2024-09-24
admin
0
Tianjin Kemei Machinery Manufacturing Co., Ltd. Ne...
Tianjin Kemei Machinery Manufacturing Co., Ltd.: New Starting Point, New Journey - New Factory Relocation Record
