PRODUCTS

Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

electric lifting stage 1ton electric chain hoist

Time：2025-01-10

Brief Explanation :

Behind the colorful stage, there is a silent "hero behind the scenes" - the stage electric hoist. Although it doesn't stand in the spotlight, it controls the crucial elements of every stunning appeara

Category : V7 Stage Electric Series

Get a Quote

Product Details

How to Use Stage Electric Hoists As a reliable assistant behind the stage, using stage electric hoists correctly can ensure the smooth progress of performances. The following are the detailed usage steps: I. Preparation before Installation Check the Venue First, conduct an inspection of the installation location above the stage. Ensure that structures such as trusses and beams have sufficient load-bearing capacity, the installation space meets the dimensional requirements of the electric hoist, and there are no obstacles blocking its running track. Verify Parameters Carefully check parameters of the stage electric hoist, such as the model, rated load, lifting height, etc., to ensure they match the actual usage requirements. For example, if you need to lift heavy large props, you must choose an electric hoist with a sufficient rated load to avoid the risk of overloading. II. Installation Steps Fix the Main Unit Fix the main unit of the electric hoist firmly on the selected support structure above the stage through professional connectors, such as high-strength bolts. During the installation process, tighten the bolts strictly in accordance with the torque requirements in the equipment manual to ensure that the main unit is installed stably and will not loosen or displace during operation. Install the Steel Wire Rope Carefully wind the steel wire rope around the drum. Pay attention to the correct winding direction of the steel wire rope to avoid knotting, twisting, etc. The end of the steel wire rope should be tightly connected to the hook or lifting gear through a reliable fixing device, such as a wedge rope socket, to ensure that it will not fall off during the lifting process. Connect the Electrical System Connect the power cord of the electric hoist to the control distribution box of the stage according to the electrical wiring diagram, ensuring that the wiring is firm and there is no risk of electric leakage. At the same time, inspect the control circuit to ensure normal signal transmission between the controller and the electric hoist for precise operation. III. Operation Process Pre-start Inspection Before each use, the operator must conduct a comprehensive inspection of the electric hoist. Check whether the fuselage has any abnormal deformation or damage, whether the steel wire rope is worn or broken, whether the brake is sensitive and effective, and whether all connection parts are loose. If any problems are found, they should be repaired in a timely manner. It is strictly prohibited to operate the equipment with malfunctions. Start the Equipment After confirming that everything is normal, turn on the power and start the electric hoist. At this time, you can first conduct an unloaded test run to observe whether its operation is stable, whether there are any abnormal noises or vibrations, and whether the drum rotates smoothly, etc., to further ensure that the equipment is in good condition. Lifting Operation Hook Up Slowly lower the hook to an appropriate position and steadily hang the items to be lifted, such as curtains, lamps, or props, to ensure that the hook is secure and the center of gravity of the item is stable. Lift According to the performance requirements, use the up/down buttons on the controller to slowly start the lifting function. When operating, apply force evenly to avoid sudden lifting and lowering, and prevent the items from swaying and colliding. At the same time, you can use the precise positioning function of the electric hoist to lift the item to the predetermined height with the minimum possible error. Positioning When the item reaches the designated position, release the up/down button. The braking system of the electric hoist will automatically lock to ensure that the item is steadily suspended in the air. If you need to fine-tune the position, you can press the up/down button again for a small adjustment. Lower When the performance is over or you need to replace the item, press the down button to slowly lower the item. Also, pay attention to controlling the lowering speed until the item safely reaches the ground. Then, raise the hook to a high position in preparation for the next operation. IV. Maintenance Daily Cleaning After the performance, promptly clean the dust and debris on the surface of the electric hoist to prevent them from entering the equipment and affecting its operating performance. You can wipe the fuselage with a clean soft cloth and also clean the steel wire rope to remove dirt, grease, and other attachments. Regular Inspection Conduct a comprehensive inspection of the electric hoist at regular intervals (such as weekly or monthly, depending on the frequency of use). This includes checking the wear of mechanical parts, the insulation performance of the electrical system, the reliability of the braking system, etc. If any problems are found, replace the damaged parts in a timely manner to ensure that the equipment is always in good condition. Lubrication Lubricate the transmission parts of the electric hoist, such as gears, bearings, steel wire ropes, etc., regularly according to the requirements of the equipment manual. Use appropriate lubricants to ensure smooth operation of the equipment and extend its service life.

In conclusion, operating and maintaining the stage electric hoist strictly in accordance with the above usage methods can not only ensure the efficient progress of stage performances but also guarantee the safety of personnel and equipment.

Stage electric hoist parameter 1