X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
The stage hoist reducer is a transmission device that plays an irreplaceable role in using the hoist: reducing the speed of the electric hoist and increasing the torque.
Category : V7 Stage Electric Series
Get a QuoteProduct Details
The stage hoist reducer is a transmission device that plays an irreplaceable role in using the hoist: reducing the speed of the electric hoist and increasing the torque. The harm of its damage is that it causes the electric hoist to fail to decelerate normally and the speed to be too high, making the motor prone to burning out and posing a danger. When we use electric hoists, it is inevitable that there will be mistakes in operation. If these mistakes cause the reducer to have a fever and get sick, how should we treat this disease? First, identify the cause of the fever and then prescribe the appropriate medication.
Reason 1: The quality of the electric hoist is unqualified. The solution to this situation is, of course, to purchase a new stage electric hoist that is of good quality and has normal heat dissipation from the reducer.
Reason 2: The reduction gear of the reducer is worn and prone to heat generation due to friction. In this case, it is necessary to check the degree of gear wear and decide whether to replace the gear.
Reason three: Long term uninterrupted use. If the reducer is in working condition for a long time and only heats up without dissipating heat, it is naturally prone to fever. The solution is to pay attention to a balance between work and rest.
Reason 4: There are impurities or too much lubricating oil in the gearbox. Solution: Open the inspection hole and observe if there are any impurities and excess oil flowing out of the gearbox. If impurities are removed, pour out excess oil.
Reason 5: Heating at the bearings causes the gearbox to overheat. The stage hoist gearbox may have a "fever" due to wear or breakage of the bearings. Solution: Replace the bearings.
RELATED PRODUCTS .
To ensure the safe use of Lifting Polyester Sling and extend their service life, users need to prevent and control the risks of temperature limitations and mechanical damage.
The design of the stage electric hoist control box usually takes into account the operating habits and convenience of stage staff. The operation interface is simple and clear, with a reasonable button
The voltage of electric stage hoists is usually between 220V and 440V. Commonly seen voltages are 220V and 380V. Electric stage hoists of different models and from different manufacturers will select
During the preparation and progress of the wedding, if there is a need to adjust the position or height of the items on the stage, the electric hoist can complete the task quickly and conveniently. Th
2025-02-28
创始人
0
The participation of Tianjin Kemei in the Guangzho...
Tianjin Kemei made a remarkable and eye-catching appearance at the Guangzhou (International) Performing Arts Equipment, Intelligent Acoustic, Optical and Electrical Products...
2025-02-27
创始人
0
Guangzhou (International) Performing Arts Equipmen...
In the era of the rapid development of stage lifting equipment and intelligent acousto - optic technology, every industry event serves as a crucial opportunity for innovatio...
2025-02-27
创始人
0
GET show Guangzhou (International) Performing Arts...
Tianjin Kemei Machinery Manufacturing Co., Ltd. has been deeply engaged in the stage equipment manufacturing field for many years and has developed into a modern benchmark e...
2024-09-24
admin
0
Tianjin Kemei Machinery Manufacturing Co., Ltd. Ne...
Tianjin Kemei Machinery Manufacturing Co., Ltd.: New Starting Point, New Journey - New Factory Relocation Record