PRODUCTS

Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

High Performance Stage Electric Chain Hoist For Truss

Time：2025-01-18

Brief Explanation :

The stage electric hoist is equipped with an intelligent remote control system. With precise operation, it can easily create a gorgeous stage for you, shining brightly.

Category : V7 Stage Electric Series

Get a Quote

Product Details

The maintenance of stage electric hoists is crucial for ensuring their stable performance, extending their service life, and guaranteeing the safety of stage performances. The following are some maintenance tips: Daily Maintenance - Appearance Cleaning: Regularly (usually once a week), wipe the outer shell of the electric hoist with a clean soft cloth to remove dust, oil stains, and debris from the surface, preventing these contaminants from entering the internal components and affecting its normal operation. Pay special attention to cleaning parts such as chains and gears to avoid increased wear caused by the accumulation of dust and oil. - Chain Inspection: Check the condition of the chain before each use, looking for any deformation, twisting, rust, or wear. If the chain wear exceeds the specified range, it should be replaced in a timely manner to prevent safety accidents caused by chain breakage. At the same time, ensure good lubrication of the chain. You can regularly (usually every 2 - 3 weeks) apply an appropriate amount of special chain lubricating oil to reduce the friction between the chain and the sprocket. - Operation Monitoring: During each use, pay attention to whether the running sound of the electric hoist is normal and whether there are any abnormal vibrations or jams. If any abnormal sounds or vibrations are detected, stop using it immediately, conduct inspections and repairs, and only resume use after troubleshooting. Regular Maintenance - Motor Maintenance: Open the motor cover every 3 - 6 months, clean the dust inside the motor, and check whether the motor wiring is secure, and if there are any loose or oxidized conditions. At the same time, measure the insulation resistance of the motor to ensure its good insulation performance. If a decrease in the motor insulation resistance is detected, promptly find the cause and take measures, such as drying the motor, replacing the insulating material, etc. - Brake System Inspection: Conduct a comprehensive inspection of the brake system quarterly, including the wear condition of the brake pads, the elasticity of the brake springs, and whether the brake clearance is appropriate. When the brake pads are severely worn, they should be replaced in a timely manner; when the elasticity of the brake springs is insufficient, adjustment or replacement is required. In addition, check the working condition of the brake electromagnet to ensure that its suction and release actions are sensitive and reliable. - Reducer Maintenance: Replace the lubricating oil in the reducer every 6 - 12 months according to the frequency of use and the working environment. When replacing the lubricating oil, thoroughly clean the inside of the reducer, remove the old oil and impurities, and then add an appropriate amount of new lubricating oil that meets the specified requirements. At the same time, check the gear meshing condition of the reducer. If there are defects such as wear or cracks, repair or replace them in a timely manner. Maintenance in Special Situations - Maintenance during Long - term Shutdown: If the stage electric hoist needs to be shut down for a long time, first conduct a comprehensive cleaning and maintenance, and then store it in a dry and well - ventilated place to avoid moisture and rust. At the same time, start and run it at regular intervals (usually once a month) to prevent performance degradation or jamming of components such as the motor and brakes due to long - term disuse.

- Maintenance after Use in Harsh Environments: If the electric hoist is used in harsh environments (such as high temperature, high humidity, or high - dust environments), special maintenance should be carried out in a timely manner. For example, after use in a high - temperature environment, wait for it to cool down before cleaning and inspection to prevent component damage caused by thermal expansion and contraction. After use in a high - dust environment, focus on cleaning the dust in the gaps of various components to prevent dust from entering the interior and affecting performance.

Stage electric hoist product details