PRODUCTS

Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

Lifting Stage Equipment Stage Hoist Controller

Time：2025-01-18

Brief Explanation :

The stage electric hoist controller, like a magical wizard behind the scenes of the stage, enhances the charm of the stage with its precise and delicate control capabilities. Through an intelligent in

Category : Controller

Get a Quote

Product Details

Instructions for Using the Stage Electric Hoist Controller The stage electric hoist controller is a key component that ensures the precise operation of stage equipment. Before use, please confirm that the controller is correctly connected to the electric hoist and the power supply is stable. The main body of the controller is equipped with a power indicator light, an operation indicator light, an emergency stop button, up/down buttons, and a speed adjustment knob. When the power is turned on, the power indicator light will light up. Pressing the emergency stop button can immediately stop the operation of the hoist. This button should only be used in emergency situations and should remain in the popped - out state during normal operation. When it is necessary to lift or lower the equipment, first release the emergency stop button, then press the up or down button. The corresponding operation indicator light will light up, and the electric hoist will start working. The speed adjustment knob can be used to adjust the lifting and lowering speed according to requirements. Rotating it clockwise increases the speed, and rotating it counter - clockwise decreases the speed. Precautions: - It is strictly prohibited to use the controller in a humid, high - temperature, or strong electromagnetic interference environment to avoid damaging the controller or causing malfunctions. - During the operation process, the operator shall not leave the post without permission and should always pay attention to the operating status of the equipment. - Do not press the up and down buttons simultaneously to prevent the motor from overloading and burning out. - Do not frequently press the buttons intermittently to prevent overheating and damage to the controller components. - Before and after each use, check whether the controller housing is damaged, whether the buttons are sensitive, and whether the wires are aged or damaged. If any problems are found, repair or replace them in a timely manner. - Overloading is strictly prohibited to avoid equipment damage and safety accidents. After use, turn off the power supply, properly store the controller, and regularly check the wires and buttons to ensure normal use next time. Common Faults and Solutions: - The power indicator light does not light up: Check whether the power plug is properly inserted and whether the power cord is damaged. If everything is normal, it may be a fault in the internal power module of the controller, and professional maintenance personnel should be contacted for inspection and repair. - The button has no response when pressed: First, check whether the emergency stop button is in the pressed state. If not, it may be due to poor contact or damage of the button. Try to clean the button contacts. If there is still no response, the button needs to be replaced.

- The electric hoist operates abnormally, such as unstable speed or jamming: It may be a fault of the speed adjustment knob. Try readjusting it. It may also be a problem with the mechanical components of the electric hoist itself, such as a jammed chain or worn - out gears. A comprehensive inspection and maintenance of the electric hoist are required.

Stage electric hoist controller