X
Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.
Calibrating and debugging the buttons or knobs of the stage electric chain hoist controller needs to be carried out according to the specific controller model and the fault situation. The following ar
Category : Controller
Get a Quote
Product Details
Product Name: Stage Electric Hoist Controller
Product Type: Controller
Calibrating and debugging the buttons or knobs of the stage electric chain hoist controller needs to be carried out according to the specific controller model and the fault situation. The following are some common methods: Check the elasticity of the buttons:
For buttons with weakened elasticity or that do not rebound, it is necessary to open the shell of the stage electric chain hoist controller and check the spring or shrapnel under the button. If the spring is deformed or has insufficient elasticity, you can try to adjust it with tools such as tweezers to restore its elasticity; if the shrapnel is damaged, a new shrapnel needs to be replaced. After adjustment or replacement, test whether the elasticity and rebound effect of the button return to normal.
Calibrate the button stroke:
The button stroke of some stage electric chain hoist controllers can be finely adjusted. After opening the controller, find the microswitch or sensor corresponding to the button and observe its contact position with the button. If the microswitch cannot be fully triggered after the button is pressed, appropriately adjust the position of the microswitch so that it can be accurately triggered when the button is pressed to the appropriate position; if the circuit cannot be disconnected in time after the button is triggered, it is also necessary to adjust the position of the microswitch or check its reset mechanism to ensure that the circuit can be cut off in time after the button is released. During the adjustment process, repeatedly test whether the triggering and disconnection of the button are normal.
Previous: Controller Handle of the Stage Electric Hoist
Next : Truss Motor Controller
RELATED PRODUCTS .
The flat webbing sling is a flexible lifting tackle widely used in various fields such as stage equipment installation, industry, logistics, and construction. It features characteristics like high str
The truss motor controller usually works based on the principle of electrical control. It receives input commands from the operator, such as pressing the up or down button, and transmits electrical si
Product Name: Stage Chain Hoist Product Type: Stage Chain Hoist The stage chain hoist 500kg, as a lifting device meticulously crafted for stage scenarios, boasts outstanding performance. Its load-bear
The electric chain stage truss hoist is mainly used for lifting and suspending heavy objects such as trusses, lighting equipment, and stage scenery on the stage. It drives the chain transmission throu
2025-02-28
创始人
0
The participation of Tianjin Kemei in the Guangzho...
Tianjin Kemei made a remarkable and eye-catching appearance at the Guangzhou (International) Performing Arts Equipment, Intelligent Acoustic, Optical and Electrical Products...
2025-02-27
创始人
0
Guangzhou (International) Performing Arts Equipmen...
In the era of the rapid development of stage lifting equipment and intelligent acousto - optic technology, every industry event serves as a crucial opportunity for innovatio...
2025-02-27
创始人
0
GET show Guangzhou (International) Performing Arts...
Tianjin Kemei Machinery Manufacturing Co., Ltd. has been deeply engaged in the stage equipment manufacturing field for many years and has developed into a modern benchmark e...
2024-09-24
admin
0
Tianjin Kemei Machinery Manufacturing Co., Ltd. Ne...
Tianjin Kemei Machinery Manufacturing Co., Ltd.: New Starting Point, New Journey - New Factory Relocation Record
